AFCO LTR 24

HORIZONTAL CARTRIDGES

PreviousNext
123

TECHNICAL DESCRIPTION OF FILTER SERIES “AFCO LTR 24”

This filter unit is suitable for the extraction of dust produced by: thermal cutting, grinding, polishing, satin finishing, and composite material processing.
The AFCO LTR24 filter unit is a self-cleaning extraction system with horizontal cartridges.
Inside, it has a pre-separation system consisting of a specially designed calming chamber. It includes an integrated metallic spark arrestor plenum. The control panel for the extractor is also integrated.
The extractor is fully integrated into the design to reduce noise impact.
The filters inside ensure maximum efficiency and effectiveness, improving air quality.
The dust collection system is designed to allow easy handling.

MAIN FEATURES:

  • Monoblock structure, thickness 30/10, powder-coated in  RAL 7011
  • Specially designed pre-separation plenum
  • Reduced maintenance times
  • Filter media in class M according to EN 779 standard
  • IN/OUT duct connections from 300mm to 450mm diameter
  • Integrated control panel
  • Quick connection with pressure reducer for compressed air circuit attachment
  • Filter cleaning control unit
  • Suction motor from 7.5 to 22 kW directly coupled
  • Noise level: 68 to 72 dB
  • Flow rate: from 4,200 to 14,000 m³/h
  • Total vacuum: 3,800 Pa = 380 mm H2O
  • From 4 to 12 cartridge filters, 35 m² each
  • Total filter surface area: from 140 to 420 m²
  • Chip container capacity: 100 liters
  • Quick-release system

SOME SIZES RELEVANT TO OUR PRODUCTION

  • MODEL
  • AFCO LTR 24 6
  • AFCO LTR 24 6
  • AFCO LTR 24 12
  • CAPACITY
  • 6.500 m3/h
  • 10.400 m3/h
  • 14.100 m3/h
  • POWER
  • 7,5 KW
  • 15 KW
  • 22 KW
  • DIM AxBxH (mm)
  • 2100x1900x2180
  • 2100x1900x2620
  • 2100x2400x2620

The sizes given refer only to the filter body excluding perimeter protections.

The AFCO LTR 24 filter can be equipped with:

inverter – thermal probe – continuous coating dosing system – Butterfly valve off plant – Extinguishing circuit with CO2 cylinder dust class D – discharge on BIG BAG with venturi system

N.B. ATEX equipment is chosen and quoted after having been examined by our technicians.

For quotations and further information, please contact our technical department that is available to propose you with the most suitable solution to meet your requirements.

N.B. Aerotecnica reserves the right to carry out all the modifications it deems necessary. The technical data and tables are not binding.